Subnet Mask - Printek 4000se Operator's Manual

P R I N T E R
IP Address Method
Possible Values:
This item controls how the optional Ethernet interface card receives its
network address. When set to Auto, the Ethernet card will receive its
network address from a network DHCP server (typical installation). When
set to Static, the user sets the TCP/IP address, Subnet Mask and TCP/IP
Gateway address as follows:
IP Address
Possible Values:
To set the TCP/IP address, use the CURSOR button to select which digit
group you wish to change, and then use the UP/DOWN VALUE button to
change the value. The value will change rapidly if the key is held down.

Subnet Mask

Possible Values:
To set the Subnet Mask, use the CURSOR button to select which digit
group you wish to change, and then use either VALUE buttons to change the
value. The value will change rapidly if the key is held down.
Gateway Address
Possible Values:
60
C O N F I G U R A T I O N
Auto*, Static
000.000.000.000 ... 255.255.255.255
000.000.000.000 ... 255.255.255.255
000.000.000.000 ... 255.255.255.255
IP Address
IP Address
192.160.0.27
Subnet Mask
255.255.255.0
IP Gateway
192.168.0.0
Auto