Form Length; Top Margin - Printek 4000se Operator's Manual

P R I N T E R
Cut Adjustment
Possible Values:
This item may be used to adjust the position of the cut relative to the top-of-
form for improved cut accuracy. This item is only available when the
optional FormsCutter is installed. Refer to the FormsCutter manual for
more information.
Lines Per Inch
Possible Values:
This item sets the line pitch to 6 or 8 Lines Per Inch (LPI).

Form Length

Possible Values:
This item sets the form length in lines at the current line pitch (LPI). For
example: for an eleven-inch form, enter 66 if you are using six lines per inch
or 88 if you are using eight lines per inch.

Top Margin

Possible Values:
This item sets the top margin in lines. Setting a top margin will reduce the
size of the printable area of the page by the number of lines set. Printing will
not be allowed above the top margin.
Note: In most cases changing where printing begins on a form should
be accomplished with ALIGN PRINT rather than with a top
margin. Adding a top margin may cause some programs to
48
C O N F I G U R A T I O N
Auto, -0.2951" ... 0* ... +0.2951", Auto
6*, 8
1 ... 66* ... 227 Lines
0* ... 226 Lines
Cut Adjustment
Lines/Inch
Form Length
66 Lines
Top Margin
0 Lines
0
6