IPC IPC1.03 User Manual page 8

Hikvision, Samsung, Honeywell and many more.
OEM service is available. Users can send us the ip camera
protocol to the tester.
2.3.4 Analog camera test
18B
Displays an analog camera image on the 3.5 inch 320*240
NTSC formats. The LCD screen's back light brightness, video image brightness, contrast and color
saturation are all adjustable.
2.3.5 PTZ controller
19B
Display the input video images. Pan/tilt the P/T unit and zoom in/ out the image. Setup the controlling
parameters like protocol, communication port, baud rate, PTZ ID, pan/tilt speed; set and call preset
position.
2.3.6 12 DC12V 1A power output
20B
Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing
when the power supply is not available
2.3.7 Audio testing
21B
Test the audio from mic level input devices. Connect the tester and mic level device with the audio
cable. Supports record and save the audio.
2.3.8 PTZ data analysis
22B
Search the Control protocol code from Multifunction keyboard or DVR by RS485 interface, test the
PTZ control command data whether received anomaly and RS485 data transmission.
Screen displays 16 hexadecimal codes such as
PELCO-P:A0 00（Add） xx xxxxxx AF xx
PELCO-D:FF 01（Add）xx xxxxxxxx
2.3.9 Digital Image zoom on the monitor
23B
Set image zoom up to 4X to get a closer look at all the image detail. Supports analog and many IP
cameras
Page.4.
mobile apps for our engineers try to add the
resolution LCD screen. Supports PAL &