Standard And High Performance Transom Assemblies - Mercury BRAVO Service Manual

SERVICE MANUAL NUMBER 28
4. Apply Loctite 242 to threads of screws and install. Torque screws to 25-30 lb.in. (2.8-

Standard And High Performance Transom Assemblies

1. Install speedometer hose clip onto bell housing.
2. Clean exhaust bellows mounting flange on bell housing with sandpaper and wipe clean
Be sure to read and follow package label directions when using bellows adhesive.
3. Apply bellows adhesive to mounting surface on inside of bellows. Allow to dry
4. Position grounding clip on bellows.
90-863160 MAY 2000
3.3 N⋅m).
a - Screws
a - Speedometer Hose Clip
b - Bell Housing
with lacquer thinner.
(approximately 10 minutes), before installing.
SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY
b
a
WARNING
a
71825
22121
Page 4B-47