Table of Contents
Advertisement
16
www.electrolux.com
3.
•
Position A for powder detergent (factory setting).
•
Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash phase.
• Do not set the delay start.
10.5 Activating the appliance
Press the
deactivate the appliance. A tune sounds
when the appliance is activated.
10.6 Setting a programme
1. Press one of the programme
touchpad to set the necessary
programme:
• The indicator
• The related programme indicator
comes on.
• The display shows all information
about washing programme.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options.
When you activate an option, the
indicator of the set option comes on.
If you set something
incorrect, the display shows
that the selection is not
possible.
10.7 Starting a programme
without the delay start
Press the
button to activate or
flashes.
.
B
4.
• The indicator of the
flash and stays on.
• The display updates accordingly
during the washing programme.
• The programme starts, the door
locks, the display shows the
indicator
If the indicator
door is locking. If the display
shows an alarm message after
the indicator
few seconds, it indicates that the
door is not properly locked (for
more details see Troubleshooting
chapter).
• The drain pump can operate for a
short time when the appliance fills
water.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
• The display shows the
.
flashes, the
has flashed for a
automatically the
programme duration
agree with the laundry
load.
new value.
stops to
Advertisement
Table of Contents
