EMS EkoLink Plus EPCELL20REM Operator's Manual page 10

EMS Wireless
EkoLink Plus Fiber Optic DAS
Handling the EkoLink Plus
1. Use ESD (electrostatic discharge) precautions when dealing with the modules
within the EkoLink Plus so that units are not damaged.
2. Opening any module voids the warranty.
3. Modules cannot be "hot-swapped" (removed while unit is in operation).
Disconnecting any component within the EkoLink Plus when powered can
damage or destroy the equipment and will void the warranty. Unit must not be
operating when modules are removed for replacement.
9
Operator's Manual