Using Computer Setup Security Features - HP EliteBook 2740p User Manual

Using Computer Setup security features

Securing system devices
You can disable or enable system devices from the following menus in Computer Setup:
To disable or reenable system devices in Computer Setup, follow these steps:
1.
2.
3.
4.
5.
6.
7.
Your changes go into effect when the computer restarts.
Viewing Computer Setup System Information
The System Information feature in Computer Setup provides two types of system information:
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
Boot Options
Device Configurations
Built-In Device Options
Port Options
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
Press f10 to enter BIOS Setup.
Use a pointing device or the arrow keys to select System Configuration > Boot Options, or
System Configuration > Device Configurations or, System Configuration > Built-In Device
Options, or System Configuration > Port Options.
Press enter.
To disable an option, use a pointing device to click Disabled next to the option.
– or –
Use the arrow keys to select Disabled next to the option, and then press enter.
To reenable an option, use a pointing device to click Enabled next to the option.
– or –
Use the arrow keys to select Enabled next to the option, and then press enter.
To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
Identification information about the computer model and the batteries
Specification information about the processor, cache, memory, ROM, video revision, and keyboard
controller revision
esc while the "Press the ESC key for Startup Menu"
Using Computer Setup security features 109