Charging The Battery Pack - Opticon PHL-7100 User Manual

2.3 Charging the Battery Pack

Before using the PDT, install and charge the battery by executing the steps described in this
paragraph.
2.3.1 Installing the battery pack
1. On the PDT attached with a hand-strap, detach the hand-strap.
2. Turn both battery cover latches downwards and lift the battery cover away from the PDT.
Figure 2-7 Release the Hand strap from PDT
Figure 2-8 Detach the battery cover from PDT
2-20
OPTICON
User's manual
PHL-7000 series