Creating Discs With Your Duplicator Max In Primo; Connecting The Laminator To Your Duplicator Xl/Pro - Primera Max Connectivity Manual

9. You have now calibrated your Laminator to the
D. CREATING DISCS WITH YOUR DUPLICATOR MAX IN
PRIMO
Laminating your disc jobs is very simple. This is done as
follows:
1. From the Main Application Screen click Robotics then
Options. Enable the Use Laminator checkbox as shown:
2. Set up your print and record job as you normally would
per the instructions in the Duplicator MAX User Manual.
3. Click the Red Circle Record button to start your job!
E. CONNECTING THE LAMINATOR TO YOUR DUPLICATOR
XL/PRO
Your Laminator connects easily to Duplicator Pro and
Duplicator XL duplicators. There are two possible
configurations, Automated Stand-Alone Mode and Full
Production Mode. Automated Stand-Alone Operation allows
you to use the Laminator in place of a CD Printer. You can then
laminate pre-printed discs without having to connect the
Duplicator or Laminator to a PC. Full Production Mode allows
you to record, print and laminate discs all in one operation.
f) Tighten the Adjusting Screws on the front of the
Laminator Stand to lock the stand in position.
Duplicator MAX and are ready to produce discs!
Optical Disc Laminator Connectivity Guide 7
TOC