Table of Contents
Advertisement
TOC
5. Along the Vertical axis of the printed disc, find the number
whose lines touch. For example, in the above illustration,
the number would be 2. Enter that number into the
Vertical box of the Calibration window and 0 would be
entered for the Horizontal axis.
6. Select the OK button. Your images should now be
centered when printed on a disc.
After your selections have been made, close out of the printer
setup window. You are now ready to go to an application
program and print. All printer driver selections will stay the
same until you change them.
Enable Ink Low Warning
This setting lets you enable or disable the warning from the
printer to tell you when the ink cartridges are getting low.
Ink Levels and Cartridge Maintenance
Select this button to display the current ink levels as well as
options for cleaning and changing cartridges.
Administrator Utility and Advanced Functions
INDEX
33
Advertisement
Table of Contents
