Table of Contents
Advertisement
TOC
Disc Output Location
Do not change this setting! It should be left in the Kiosk
mode setting.
Enable Bi-di Printing
When enabled the Bravo will print bi-directional for faster
printing. The default is uni-directional printing. When you
enable bi-directional printing, you should perform the
Alignment Calibration described later in this section. Please
note that the calibration is stored on your computer, so if you
move to a new computer you must repeat the calibration.
Alignment Calibration
The Alignment Calibration allows you you create a test print
that will provide you with values to configure your printer for
Bi-Di- Printing and to align the color and black cartridges for
Color+Black printing. If Bi-Di Printing is enabled, or if you use
Color+Black as a cartridge type in the driver settings, it is
important to perform this calibration every time you change a
cartridge. To print, click the Alignment Calibration Properties
button then click Yes.. The print will look like this:
0
4
A
1
5
6
2
3
7
B
0
2
4
6
C
0
2
4
6
0
2
4
6
D
Administrator Utility and Advanced Functions
INDEX
8
12
9
13
10
14
11
15
8
10
12
14
8
10
12
14
8
10 12 14
35
Advertisement
Table of Contents
