To Remove The Hba Hardware - Oracle 7101690 Installation Manual

To Remove the HBA Hardware

2.
Use the cfgadm -c unconfigure command to unconfigure the attachment point ID
(Ap_Id) for the HBA.
3.
Use the cfgadm -c disconnect command to prepare the HBA for removal.
A flashing OK/Power LED indicates that the HBA is being prepared for removal. A dark OK/
Power LED indicates that the HBA is ready to be removed, as described in
HBA Hardware" on page
To Remove the HBA Hardware
1. Disconnect all cables.
Press the HBA latch to disengage the HBA, and then pull forward and down to
2.
eject it.
You can now remove the HBA.
30 Sun Storage 16 Gb Fibre Channel ExpressModule Host Bus Adapter, Emulex Installation Guide For HBA Model
7101690 • January 2018
30.
"To Remove the