Advertisement
1
For further details on product installation, see the complete Installation Manual available on the
CD included with this product.
NOTE
Compliance:
- This product is intended to be installed by Qualified Personnel only.
- This product is intended to be connected to a UL Listed
Computer which supplies power directly to the reader or a
UL Listed Direct Plug-in Power Unit marked LPS or
"Class 2", rated 10 to 30 V, minimum 1 A.
- In order to meet the EMC requirements:
•
connect reader chassis to the plant earth ground by
means of a flat copper braid shorter than 100 mm;
•
connect the main interface cable shield to pin 1 of the
reader 25-pin connector;
•
use two clip-on ferrite sleeves (type Stewart 28A2029-
0A0) on the main interface cable near the reader 25-
pin connector;
Model Description:
2
Figure A
1
Reading Window
2
Auxiliary Interface
3
Main/Auxiliary Interface
4
Main Tx LED
MATRIX - 10X1
2 = High Density (HD)
3 = Standard Density (STD)
4 = Low Density (LD)
5 = Medium Range (MR)
MATRIX-1000™ QUICK GUIDE
4
5
3
2
5
Good Read LED
6
External Trigger LED
7
Power On LED
TO EN 60825-1:2001
Optics
6
7
Advertisement
