Clone Method Settings - Logicube EchoPlus-NG User Manual

As an example, if 4096 Bytes is chosen, and one of the 8 sectors in that cluster
size contains a bad sector, the EchoPlus-NG will skip the entire cluster (or 4096
bytes or 8 sectors).

4.3.4 Clone Method Settings

When Drive to Drive mode is selected, Clone Method Settings will appear on
the top-right of the Settings screen. Tap Clone Method Settings and the
following screen will appear:
The Settings screen changes depending on which of the three Modes (Drive to
Drive, Image to Drive, or Drive to Image) is selected. Each of the three modes
has their own different Settings screen.
Logicube EchoPlus-NG User's Manual
4.3.4.1 Special Settings for Drive to Drive
When Drive to Drive mode is selected, Clone Method Settings
will appear on the top-right of the Settings screen:
Tap Clone Method Settings and one of the following two
screens will appear:
CLONE
27