Logicube EchoPlus-NG User Manual page 73

8.6.1 Step-by-step instructions – Static IP address
1. Select Network Settings from the types of operation on the left side.
2. Select the Interfaces tab.
3. Tap ETH0 or ETH1 to highlight a network port to be configured.
4. Tap Edit Configuration to edit the entry. The Edit Network Interface
5. Tap the Type box and select STATIC then tap the OK icon. The IP
Logicube EchoPlus-NG User's Manual
Configuration screen should appear.
SETTINGS box should now be selectable.
REMOTE OPERATION
65