Table of Contents
Advertisement
Basic Operation Instructions
GC CONTROLLER
The GC Controller is a fully programmable, modular-electronic controller
system that allows you to operate your power chair. It is designed to allow
the user to have complete control over chair movement and speed.
The controller has been pre-programmed to meet a typical user's needs. The
program is set using either a personal computer with software provided by
the controller manufacturer or with a hand-held programmer, also provided
by the controller manufacturer.
WARNING! The controller program can affect speed,
acceleration, deceleration, dynamic stability, and braking.
If it is programmed incorrectly or outside of the safe limits
as determined by your healthcare professional, it can
create a dangerous situation. Only the power chair
manufacturer,
manufacturer, or a trained service technician should
program the controller.
PRECAUTIONARY GUIDELINES
Before operating the GC controller, please read the following. These
guidelines are provided for your benefit and will aid you in the safe
operation of the control system.
Turn off the power to the controller when transferring to or from your
power chair.
Follow all of the procedures and heed the warnings as explained in your
power chair owner's manual.
an
authorized
www.pridemobility.com
representative
7
of
the
GC Controller
Advertisement
Table of Contents
