Options - AEG FEE92800PM User Manual

• The indicator
off.
• The indicator
flashes.
• The display shows the current
setting: e.g.
– The levels of rinse aid range
2. Press Start repeatedly to change the
setting.
3. Press the on/off button to confirm
the setting.
6.4 AirDry
AirDry improves the drying results with
less energy consumption.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
and
= level 4.
from 0A to 6A, where0A
means no rinse aid is used.
go
still
AirDry is automatically activated with all
programmes excluding
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Delay.
• The indicators
• The indicator
• The display shows the current
2. Press Delay to change the setting:
3. Press on/off to confirm the setting.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With use
of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
The XtraDry option is a permanent
option for all programmes other than
every cycle.
Every time
option is off and needs to be chosen
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
CAUTION!
In case of presence of
children, the AirDry system
can be deactivated if you
want to keep the door
closed in the end of the
cycle.
are off.
still flashes.
setting: = AirDry activated.
= AirDry deactivated.
and need not to be selected at
is activated, XtraDry
ENGLISH 11
and