Configuring/Address Space - Siemens SIMATIC S7-1500 Manual

Configuring/address space

4.1 Configuring
Introduction
The technology module is configured and assigned parameters with the configuration
software.
The technology module functions are controlled and monitored by the user program.
System environment
The technology module can be used in the following system environments:
Table 4- 1 Possible applications of the technology module
Possible Components required
applications
Central operation
S7-1500 automation sys-
•
in an S7-1500
tem
system
TM PTO 4
•
Distributed opera-
S7-1500 automation sys-
•
tion in an
tem
S7-1500 system
ET 200MP distributed I/O
•
system
TM PTO 4
•
Distributed opera-
S7-1200 automation sys-
•
tion in an
tem
S7-1200 system
ET 200MP distributed I/O
•
system
TM PTO 4
•
Distributed opera-
S7-300/400 automation
•
tion in an
system
S7-300/400 sys-
ET 200MP distributed I/O
•
tem
system
TM PTO 4
•
26
Configuration software
STEP 7 (TIA Portal):
Device configuration and parameter setting
•
with hardware configuration
Parameter setting with axis technology
•
object for Motion Control
STEP 7 (TIA Portal):
Device configuration and parameter setting
•
with hardware configuration
Parameter setting with axis technology
•
object for Motion Control
(PROFINET IO and PROFIBUS DP
STEP 7 (TIA Portal):
Device configuration and parameter setting
•
with hardware configuration
Parameter setting with TO_PositioningAxis
•
technology object
(PROFINET IO and PROFIBUS DP
STEP 7 (TIA Portal):
Device configuration and parameter setting
with hardware configuration (PROFINET IO
and PROFIBUS DP )
1
STEP 7:
Device configuration and parameter setting of
the module with GSD file (PROFINET IO)
Technology Module TM PTO 4 (6ES7553-1AA00-0AB0)
In the user
program
Motion Control in-
structions
)
1
)
1
Direct access to
control and feedback
interface (Page 34) of
the technology mod-
ule control in the IO
data
Manual, 12/2016, A5E38896703-AA
4