Parameters - Siemens SIMATIC S7-1500 Manual

4.4

Parameters

You can use various parameters to define the properties of the technology module.
Depending on the settings, not all parameters are available. When parameters are assigned
in the user program, the parameters are transferred to the module with the "WRREC"
instruction and data record 128 (Page 56).
You have the following options for setting the module's parameters:
Parameter setting via ...
Hardware configuration in
STEP 7 (TIA Portal) with HSP in
the case of centralized operation
in an S7-1500 system
Hardware configuration in
STEP 7 (TIA Portal) with HSP in
the case of distributed operation
in an S7-1500 system
Hardware configuration using
GSD file for distributed operation
on the PROFINET IO
You will find the parameters in the following table.
Technology Module TM PTO 4 (6ES7553-1AA00-0AB0)
Manual, 12/2016, A5E38896703-AA
Basic procedure
1. Install the appropriate HSP file.
2. Select an appropriate CPU under "Add new device > Control-
ler > SIMATIC S7-1500".
3. Select the module in the hardware catalog under "Technology
modules".
4. Set the device configuration and the parameters of the module
in the hardware configuration.
5. Set the parameters of the technology object.
6. Download the parameter assignment to the module.
1. Install the appropriate HSP file.
2. Select an appropriate IM in the hardware catalog under "Dis-
tributed I/O > ET200MP".
3. Select the module in the hardware catalog under "Technology
modules".
4. Set the device configuration and the parameters of the module
in the hardware configuration.
5. Set the parameters of the technology object.
6. Download the parameter assignment to the module.
1. Install the current PROFINET GSD file.
2. Select an appropriate IM in the hardware catalog under "Other
field devices > PROFINET IO > I/O".
3. Select the module in the hardware catalog under "Technology
modules".
4. Set the parameters of the module in the hardware configura-
tion.
5. Download the parameter assignment to the module.
Configuring/address space
4.4 Parameters
29