Toyota Verso-S Manual page 492

5-2. Steps to take in an emergency
Vehicles without a smart entry & start system: Maintain the
STEP 7
engine speed of the second vehicle and turn the engine
switch to the "ON" position, then start the vehicle's engine.
Vehicles with a smart entry & start system: Maintain the
engine speed of the second vehicle and turn the "ENGINE
START STOP" switch to IGNITION ON mode, then start the
vehicle's engine.
Once the vehicle's engine has started, remove the jumper
STEP 8
cables in the exact reverse order in which they were con-
nected.
Reinstall the cover, and then hook the rubber strip's groove
STEP 9
onto the cover.
Left-hand drive vehicles
Right-hand drive vehicles
492
VERSO-S_EE