If The “N” Indicator Is Flashing; If The “N” Indicator Is Flashing And Warning Buzzer Is Beeping; Reverse Warning Buzzer - Toyota Verso-S Manual

2-1. Driving procedures
If the "M" indicator does not come on even after shifting the shift lever

to M
This may indicate a malfunction in the multi-mode manual transmission sys-
tem. Have the vehicle inspected by any authorized Toyota dealer or repairer,
or another duly qualified and equipped professional immediately.
(In this situation, the transmission will operate in the same manner as when
the shift lever is in E.)
If the "N" indicator is flashing

 When shifting the shift lever
Shift the shift lever to N. Wait a few seconds and shift the shift lever to the
desired position.
 When the engine is turned off
Vehicles without smart entry & start system: Turn the engine switch to the
"ON" position. Depress the brake pedal and shift the shift lever to N, and
then to the desired position.
Vehicles with smart entry & start system: Turn the "ENGINE START
STOP" switch to IGNITION ON mode. Depress the brake pedal and shift
the shift lever to N, and then to the desired position.
If the indicator still flashes after the above operations, shift the shift lever to
N and start the engine. Then, shift the shift lever to the desired position.
 If the "N" indicator is flashing and warning buzzer is beeping
Shift the shift lever to N, and then to E, M or R.


Reverse warning buzzer

When shifting into R, a buzzer will sound to inform the driver that the shift
lever is in R.
 Downshift restriction warning buzzer (in E mode [when the paddle shift
switches are operated] or M mode)
To help ensure safety and driving performance, downshifting operation may
sometimes be restricted. In some circumstances, downshifting may not be
possible even when the shift lever or paddle shift switches are operated. (A
buzzer will sound twice.)
188
VERSO-S_EE