Adsl Settings - D-Link DSL-2750E User Manual

3.3.9.6 UPnP
Choose ADVANCED > Network Tools and click UPnP. The
page shown in the following figure appears.
In this page, you can configure universal plug and play
(UPnP). The system acts as a daemon after you enable
UPnP.
UPnP is used for popular audio visual software. It allows
automatic discovery of your device in the network. If you are
concerned about UPnP security, you can disable it. Block
ICMP ping should be enabled so that the device does not
respond to malicious Internet requests.
Click Apply to save the settings.

3.3.9.7 ADSL Settings

Choose ADVANCED > Network Tools and click ADSL
Settings. The page shown in the following figure appears.
錯誤! 尚未定義樣式 錯誤 尚未定義樣式。 。 。 。
錯誤 錯誤 尚未定義樣式 尚未定義樣式
59