D-Link DSL-2750E User Manual page 47

Enter the Filter Name and specify at least one of the
following criteria: protocol, source/destination IP address,
subnet mask, and source/destination port.
Click Apply to save the settings.
Note:
The settings only apply when the firewall is enabled.
The ACTIVE INBOUND FILTER shows detailed information
about each created inbound IP filter. Click Remove to remove
an IP filter (only appears when an IP filter exists).
錯誤! 尚未定義樣式 錯誤 尚未定義樣式。 。 。 。
錯誤 錯誤 尚未定義樣式 尚未定義樣式
44