D-Link DSL-2750E User Manual page 12

Figure 4 Connection diagram (with a telephone set before the splitter)
Connection 1 is recommended.
Note:
When connection 2 is used, the filter must be installed close to the
telephone cable. See Figure 4. Do not use the splitter to replace the
filter.
Installing a telephone directly before the splitter may lead to
failure of connection between the device and the central office,
or failure of Internet access, or slow connection speed. If you
really need to add a telephone set before the splitter, you
must add a microfilter before a telephone set. Do not connect
several telephones before the splitter or connect several
telephones with the microfilter.
Figure 5 Wall Mount Description.
The device can be hung on the wall, as shown in annex
pictures
錯誤! 尚未定義樣式 錯誤 尚未定義樣式。 。 。 。
錯誤 錯誤 尚未定義樣式 尚未定義樣式
9