Hardware Installation - D-Link DSL-2750E User Manual

Hide thumbs Also See for DSL-2750E:

Table of Contents

2 Hardware Installation

Step 1 Connect the DSL port of the device and the Modem

port of the splitter with a telephone cable. Connect the

phone to the Phone port of the splitter through a

telephone cable. Connect the incoming line to the

Line port of the splitter.

The splitter has three ports:

Step 2 Connect the LAN port of the device to the network

card

(MDI/MDIX).

Note:

Use twisted-pair cables to connect with the Hub or switch.

Step 3 Plug one end of the power adapter to the wall outlet

and connect the other end to the Power port of the

device.

Connection 1: Figure 3 displays the application diagram for

the connection of the device, PC, splitter and telephone sets,

when no telephone set is placed before the splitter.

錯誤! 尚未定義樣式

錯誤

Line: Connect to a wall phone port (RJ-11 jack).

Modem: Connect to the DSL port of the device.

Phone: Connectto a telephone set.

the

尚未定義樣式。。。。

尚未定義樣式

through

Ethernet

cable

Table of Contents