Danfoss Termix VMTD Compact 20 Installation Manual page 13

Installation Guide Termix VMTD Compact 20
6.1.3 Flow controller with integrated control valve
The controller is a self-acting flow controller with integrated control
valve. The controller closes when set max. flow is exceeded and
can be used in combination with Danfoss electrical actuators with
or with out safety function. Spring return motor can be used as
safety function by power failure.
6.1.4 Electronic control
Substations with electronic control must be set in accordance with
manufacturer´s instructions.
Where the room temperature is controlled by radiator thermostats,
it is recommended that thermostats be set for minimum
temperature in each room.
6.1.5 Outdoor temperature sensor (ESMT)
Outdoor sensors should be mounted so as to avoid exposure to
direct sunlight. They should not be placed close to doors, windows
or ventilation outlets.
Danfoss Heating
VI.CW.W2.02 / LUK41200 DEN-GT 13