Battery Level Indicator - UTStarcom C2000 Manual

USING THE BA
USING THE BA

BATTERY LEVEL INDICATOR

1
1
You can always monitor the battery charge condition with the
constant battery level indicator. The number of blocks indicates
the battery conditions as follows;
Full charge
Low charge
Flashing indicates discharged.
POWER MANAGEMENT
Mode
Battery
Lithium Ion Digital
(The criteria of measurement is in accordance with our internal
specification.)
The operating times are approximate values and may vary depending
on network configuration and handset usage.
10
TTER Y
TTER Y
Talk Time
Standby Time
up to up to
120 min 215 h
BASIC OPERA
BASIC OPERA
TURNING THE PHONE ON
1
1
Press and hold the [ ]key for approximately 3 seconds to
turn your phone on.
TURNING YOUR PHONE OFF
1
1
Press and hold the [ ]key to turn your phone off.
MAKING A CALL
1
1
Press and hold the [ ]key to turn your phone on.
2
2
In idle mode, enter the phone number with the area code.
Press the [ ] key to make a call.
(A maximum of 32 digits will be displayed.)
If you wish to make an international call, press and hold [
until the '+' symbol appears on the screen. Then, dial the country
code, area code and telephone number.
• To Correct a Number
Press [ ] to clear the last digit.
Press and hold [ ] to erase all the digits entered.
• If the Call Fails to Go through
Press [ ] and [
TION
TION
]
] to redial the number.
11