Dial A Selected Entry - Verizon T1960 User Manual

Dial a Selected Entry

From the Received Calls list:
1. Press or
entry.
2. Press . The T1960 will dial the displayed number.
OR
If the Area code has been set, you may need to format the number
for correct dialing, under some circumstances. To format a number:
1. Press Options
2. You can format the number to be either:
•
7-Digits (7-digit number only, Local)
•
10-Digits (Area-Code+ Number, Regional)
•
11-Digits (1+Area-Code+Number, Long Distance)
3. Press or
4. Press OK to dial the highlighted number.
From the Dialed Calls list:
1. Press or
previously dialed number.
2. Press the T1960 will dial the displayed number.
If the Area Code has not been set the T1960 will only dial the
displayed number after you press
unless the Area Code has been set.
See page 39 for information about setting Area Codes for the T1960.
T1960 Call Lists
to scroll through the list and highlight an
then select Call and
to change from 7 - 10 - 11 digit formatting.
to scroll through the list and highlight a
Call.
R9
OK to display the number.
You cannot format a number
45