Getting Started - Verizon T1960 User Manual

Getting Started

12
Getting Started
Location
You need to place your T1960 within 6 feet
of the AC power outlet and telephone socket
so that the cables will reach.
Make sure it is at least 3 feet away from
other electrical and metal appliances to
avoid interference issues.
Your T1960 works by sending radio signals
between the handset and base. The
strength of the signal depends on where you
locate the base. Putting it as high as
possible and separated as much as possible
from other radio devices and metal objects
ensures the best signal.
WARNING
Do not place your T1960 in
the bathroom or other
humid areas.
IMPORTANT
Do not connect the
telephone line until the
handset is fully charged.
The base must be plugged
into the AC power at all
times.
Battery charging light
The red charging light on
the base stays on while the
handset is on the base,
even when the batteries
are fully charged.
Talk/Standby time
Under ideal conditions, fully
charged handset batteries
should give up to 4 hours
talk time or 80 hours
standby time on a single
charge.
Battery low warning
When the handset battery
symbol is empty and
flashing (see page 18), you
will hear a warning beep.
Start recharging your
handset right away.
When charging the battery,
level bars are animated.
R9