Table of Contents
Advertisement
Ensure the charger is
connected to the AC power
outlet at all times.
Getting Started
If you have purchased
additional handsets:
On each charger:
1. Connect the AC power adapter to the
charger.
2. Plug the AC power adapter into an
electrical wall outlet.
On each additional handset:
3. Insert the 2 x AAA NiMH batteries
supplied into the handset, paying
attention to the polarity (See page 13).
Slide the battery compartment cover
into place.
4. If the batteries have enough charge the
handset will power-up with "Not
Registered" on the display.
5. Charge the handset for at least 16
hours.
Once fully charged, your additional
handset(s) are required to be registered to
the base. See page 50.
Your additional handsets are now ready
for use.
R9
15
Advertisement
Table of Contents
