Handset Priority - Verizon T1960 User Manual

T1960 Base Settings
42

HANDSET PRIORITY

Information
Normally, if you have more
than one handset
registered to your base,
they all ring at the same
time. However, you can
set one of them to ring
before the others, so that
calls can always be
answered at one handset
first.
Protecting your settings
When entering a PIN the
digits are shown as
asterisks.
Keep track of your PIN
If you change the System
PIN, keep a record of the
new number by writing in
the space provided on the
last page of this User
Guide. You need your
System PIN for registering
handsets and for some
other optional settings.
If you enter the PIN
incorrectly the screen
shows Incorrect PIN.
Handset Priority
The default setting is for all registered
handsets to ring at the same time. To set
one handset to ring before the others:
1. Press Menu then use
Base Settings. Press OK.
to highlight Handset
2. Press
Priority then press OK. All Handsets
is highlighted.
to Select Handset then
3. Scroll
press OK. Scroll
Handset # you want to ring first. Press
OK.
4. Scroll or
number of rings at the handset before
the other handsets start ringing (2, 4, 6).
Press OK to confirm.
System PIN
The System PIN is used for registering and
de-registering handsets.
The default System PIN is 0000.
1. Press Menu then use
Base Settings Press OK.
to highlight System PIN
2. Press
then press OK.
3. Enter Old PIN: is displayed. Enter PIN
then press OK.
4. Enter New PIN: is displayed. Enter the
new PIN (1 to 8 digits) then press OK.
5. Confirm New PIN is displayed. Enter
new PIN again then press
your new PIN.
R9
to select
or to the
to select the
to select
OK to confirm