Table of Contents
Advertisement
Interface
E1 Spread Spectrum Radios
Figure 5-65 Clost-Test
5.2.8
Link Info
Figure 5-66 Link Info
G1. Link ID: n
Display the ID of the Link; n=1~255. Link ID indicates that current receiving signals is coming from correct
remote station. In network, there is possibility to receive same-frequency signal not belonging to the same link.
In this situation, the signal should be viewed as interference. For avoiding the situation, the two stations of the
same link should be set to be the same Link ID. When local equipment receives signals, system would
compare Link ID. If it is identical, it means system is receiving correct signals. If not, it would cause Link ID
alarm and output E1 signals with all "1".
Figure 5-67 Link ID:n
5-29
Advertisement
Table of Contents
