Figure 5-4 Alarm Status - K-Best Technology Inc. E1 User Manual

Now press the OK button of the panel. It will display the alarm message. Press the Right/Left button of the
panel. The LCD displays the current alarm message. Please refer to section 9.2.For example:
Whenever there is an alarm, the LCD back light will light for 2 minutes and the buzzer sounds goes off. Other
than removing the alarm status or switching off the buzzer status, we can switch off the buzzer by pressing the
SEL button. To switch on the buzzer, please enter the IDU Info/Buzzer: On/Off.

Figure 5-4 Alarm Status

1. Message in
the next page
2. Press to read the
next page
3. The first line of the LCD
shows the line shifts
towards the left
Figure 5-5 Alarm Function
Figure 5-6 Buzzer OFF
5-4
Interface
E1 Spread Spectrum Radios