Table of Contents
Advertisement
glow.
Remote End:
appears at the right bottom of the LCD.
Item
Symbol
It means under condition of IF loopback. IF loopback could be activated by LCD panel. You
I
could cancel it in LCD panel, textmenu, and SNMP software.
It means under condition of RF loopback. RF loopback could be activated by LCD panel. You
H
could cancel it in LCD panel, textmenu, and SNMP software.
It means under condition of local loopback. Local loopback could be activated by LCD panel.
L
You could cancel it in LCD panel, textmenu, and SNMP software.
It means under condition of remote loopback. Remote loopback could be activated by LCD
R
panel. You could cancel it in LCD panel, textmenu, and SNMP software.
P
It means one of local tributaries is under condition of sending PRBS. It could be activated and
cancelled in LCD panel, textmenu, and SNMP software. In this mean time, the corresponding
tributary of remote station is receiving PRBS. You could read accumulated error numbers in
LCD panel of remote station.
Figure 5-30 Tn-L-LP:En/Dis (3)
Figure 5-31 Tn-L-LP:En/Dis (4)
Table 5-1 Loopback Test Lists
Content
5-14
Interface
E1 Spread Spectrum Radios
Advertisement
Table of Contents
