Keyboard Operating Platform - ATEN CS1922M User Manual

CS1922M / CS1924M User Manual

Keyboard Operating Platform

The switches' default port configuration is for a PC-compatible keyboard
operating platform. If your console uses a PC-compatible keyboard and you
have a Mac attached to a port, for example, you can change the port's keyboard
operating platform configuration so that the PC-compatible keyboard emulates
the Mac keyboard. The procedure is as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see page 24).
3. Press and release the appropriate Function key (see table below). After
completing this procedure, you automatically exit HSM.
Function Key
[F1]
[F2]
[F10]
List Switch Settings
To see a listing of the current switch settings, do the following:
1. Open a text editor or word processor and place the cursor in the page
window.
2. Invoke HSM (see page 24).
3. Press and release [F4] to display the settings.
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 24).
2. Press and release [F5].
26
To set the keyboard/mouse to use SPC mode so that it can work
under special operating systems as a standard (104 key) key-
board/mouse.
Enables Mac keyboard emulation, see Mac Keyboard, page 31
for details.
Automatically detects and sets the keyboard operating platform.
Operation