TP-Link RE270K / RE370K User Manual page 7

User's Manual
Green: The extender is plugged into an active power outlet.
Flashing green: Initializing.
Power
Flashing green rapidly: Upgrading irmware.
LED ON/OFF Button
3
Press to turn the LED Indicators ON or OFF.
Reset Button
4
Press and hold for about 5 seconds or until the Status LED starts to lash amber and green
alternately to only reset the network settings without losing the current settings and initiate the
SoftAP mode.
Press and hold for about 10 seconds or until the Status LED starts to lash amber rapidly to reset
the extender to factory defaults.
Socket ON/OFF Button
5
Press to turn the Smart Plug and its LED indicator ON or OFF.
6
Smart Plug
Plug in your electronic devices and small appliances with the input range from 100V to 240V, and
control them from the Kasa app
Note: The input voltage should be consistent with the output voltage of the power outlet.
Gigabit Ethernet Port
7
Connect Ethernet-only (wired) devices such as Smart TVs, game consoles, and Blu-ray players to
your wireless network with Ethernet cables.
www.tp-link.com
Wi-Fi Extender+
7