Dhcp Server - TP-Link RE270K / RE370K User Manual

User's Manual
! You will be disconnected from the extended network upon changing the IP address. To access the
extender's web-based interface, enter http://tpinkrepeater.net or the new assigned IP address, and
log in.
DHCP Server
By default, the Wi-Fi Extender+ is conigured as a DHCP (Dynamic Host Coniguration Protocol) server to
automatically allocates dynamic IP addresses to DHCP clients connected to your extended networks.
To change the DHCP Server settings:
1. Launch a web browser and enter http://tplinkrepeater.net into the URL ield, then log in using the
admin credentials.
2. Under the Settings tab, go to Network.
3. Scroll down to the DHCP Server Settings section, select one of the following options:
Auto: This option is selected by default to automatically allocate IP addresses to devices.
•
On: If you want the extender to allocate IP addresses from a IP address pool, select this option
•
and enter the following:
a.
IP Address Pool: Enter the starting and ending IP addresses in dotted-decimal notation.
These addresses must be in the same subnet as the main (host) network.
b.
Address Lease Time: Enter the time duration that an IP address is leased to the client
between 1 and 2880 minutes. The default is 1 minute.
Default Gateway: Enter the LAN IP address of your main (host) network. This ield is
c.
optional.
d.
Primary DNS: Enter the primary DNS address of your main (host) network. This ield is
optional.
Secondary DNS: Enter the secondary DNS address of your main (host) network. This ield is
e.
optional.
www.tp-link.com
Wi-Fi Extender+
30