Backup And Restore - TP-Link RE270K / RE370K User Manual

User's Manual
IMPORTANT: To prevent upgrade failure, please note the following:
!
Make sure that the latest irmware ile you downloaded matches the Hardware Version as
•
displayed under the Settings > System Tools > Firmware Upgrade page.
Make sure you have a stable connection (wired or wireless) between the Wi-Fi Extender+ and
•
the computer performing the irmware upgrade.
Backup your current coniguration from the Settings > System Tools > Backup & Restore page.
•
Do NOT unplug the Wi-Fi Extender+ during the irmware upgrade.
•
1. Launch a web browser and enter http://tplinkrepeater.net into the URL ield, then log in using the
admin credentials.
2. Under the Settings tab, go to System Tools > Firmware Upgrade.
3. Click to locate and select the downloaded irmware ile.
4. Click to start upgrading the irmware.
! The irmware upgrade takes a few minutes to complete, and the Wi-Fi Extender+ will automatically
reboot. Please DO NOT unplug the Wi-Fi Extender+ or interrupt the irmware upgrade or reboot
processes.
Backup and Restore
It is highly recommended to backup your current conigurations on a regular basis, before factory
resetting, or irmware upgrading. In the case of network failure or poor Wi-Fi performance, you will be
able to restore the Wi-Fi Extender+ to its previous state.
! Please DO NOT unplug the Wi-Fi Extender+ or interrupt the backup or restore process.
1. Connect your computer to the Wi-Fi Extender+ via a wired or wireless connection.
2. Launch a web browser and enter http://tplinkrepeater.net into the URL ield, then log in using the
www.tp-link.com
Wi-Fi Extender+
36