Safety Precautions - Celestix E6600 Installation Manual

Safety Precautions

• Do not overload the AC supply branch circuit that provides power to the server.
• Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
• Plug the power cord into a grounded electrical outlet that is easily accessible at all times.
• Unplug the power cord from the inlet on the appliance rear panel to disconnect power to the
server.
• Do not place anything on the power cords or cables. Arrange them so that no one can accidentally
step on or trip over them. Do not pull on a cord or cable. When unplugging the cord from the
electrical outlet, grasp the cord by the plug.
• Do not plug telecommunications/telephone connectors into the NIC connectors.
• This server contains an internal lithium battery. There is a risk of fire and burns if battery is not
handled properly. Do not attempt to recharge the battery. Do not expose the battery to
temperatures higher than 60° C. Do not disassemble, crush, puncture, short external contact, or
dispose of battery in fire or water.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by Celestix. Dispose of used batteries according to local regulations for
hazardous waste.
WARNING:
▪ RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
▪ DISPOSE OF USED BATTERIES ACCORDING TO HAZARDOUS WASTE PROCEDURES AS
REQUIRED IN YOUR AREA.
▪ HAZARDOUS MOVING PARTS.
▪ KEEP FINGERS AND OTHER BODY PARTS AWAY.
49 E Series Installation Guide