Firewall Ports Reference - Celestix E6600 Installation Manual

Firewall Ports Reference

Use the port reference information below to plan for deploying the appliance.
Celestix Technology
The ports in the section below are required for Comet or application functionality.
SecureAccess
TCP port 443 inbound to connect
TCP port 8098 inbound and outbound for licensing and to download configuration files
Microsoft Technology
The following reference information is provided here for convenience. It is based on Microsoft® TechNet
articles for each of the technologies listed. It. Please see TechNet (https://technet.microsoft.com/) for the
most current information.
Last update: 4/14/2016
DA (behind firewall unless otherwise stated)
Required
TCP port 443 inbound and outbound
Conditional
Protocol 41 inbound and outbound for 6to4
UDP port 3544 inbound and outbound for Teredo
VPN (behind firewall unless otherwise stated)
TCP port 1723 inbound and outbound for PPTP
Protocol 47 inbound and outbound for PPTP
TCP port 443 inbound and outbound for SSTP
UDP port 500 inbound and outbound for L2TP/IPsec/IKEv2
UDP port 4500 inbound and outbound for L2TP/IPsec/IKEv2
Protocol 50 inbound and outbound for L2TP/IPsec/IKEv2
UDP port 1701 inbound and outbound for L2TP/IPsec/IKEv2 (perimeter deployment)
WAP
TCP port 443 inbound and outbound
TCP port 22 inbound and outbound for SSH when SSO Portal is deployed
NPS
UDP port 1812
UDP port 1813
UDP port 1645
UDP port 1646
RD Gateway
TCP 5504 for connection RD Connection Broker
TCP 5985 for WMI and PowerShell Remoting for administration
Remote Desktop Web Access
47 E Series Installation Guide