Table of Contents
Advertisement
Deployment Assumptions
Information presented in the E Series setup instructions is based on the following:
• Active Directory (AD) is used as the domain controller.
• Remote connectivity system administrators are familiar with:
▪ Windows Server management
▪ Microsoft Active Directory®
▪ Microsoft Unified Remote Access
▪ Network Policy Server*
▪ Work Folders*
▪ Remote Desktop Web Access*
*As required for deployment.
Requirement Checklist
The following items will be required to set up the E Series. Plan ahead so that items are available when
needed to complete configuration.
• Domain administrator credentials
• PowerShell remoting is enabled
Example Information
To help make the instructions clear, these examples are used to identify components.
Celestix Edge Appliance
Celestix Edge01.example.com
FQDN
Celestix Edge01
Host Name
example.com
Domain Name
Use the Setup Wizard
While working through the wizard, the appliance may need to reboot.
Wizard Instructions
1. Administrator Password – the default local administrator password should be changed as a
security precaution because it is public knowledge. However, once the appliance has been joined
to the internal domain, domain administrator credentials must be used to access features.
▪ User name – the Administrator Password feature only changes the local administrator
password, which must be the logged in account.
▪ Password – enter and confirm a new password. Complexity requirements are noted on the
screen.
2. Date and Time – use onscreen controls to enter the date, time, and time zone, then configure for
daylight savings if necessary.
3. Network Interfaces – if DHCP was used initially to assign an IP address, select the LAN network
adapter to set a static address. A static address includes these settings:
▪ Internet Protocol (IP) address
▪ Subnet mask
▪ Gateway address
▪ Automatic or preferred DNS server
23
E Series Installation Guide
Advertisement
Table of Contents
