Advertisement
To attach the Remote Control Button:
1. Detach the two grip pads from each other.
2. Peel off the protective sheet (pad with soft fabric) from the
adhesive side and attach the pad to the desired location in the
car. Make sure the surface where you attach this pad is dry and
clean from dirt and dust.
3. Peel off the protective sheet (pad with rugged fabric) from
the adhesive side and attach the pad to the bottom of the
Remote Control Button.
4. Press the Remote Control Button against the pad in the car
until button is firmly in place.
3.
4.
1.
2.
HF Microphone HFM-8
The HF microphone should be installed according to the direc-
tions in the separate microphone installation guide. Ensure the
microphone is as close to the driver's mouth as possible, and
attached to a surface that is mechanically quiet. The micro-
phone should be mounted at least 3 ft./1 m away from the
handsfree unit speaker to avoid acoustic feedback.
Insert the HFM-8 plug into the MIC socket in HFW-1 and twist
90° clockwise to lock firmly in place.
HF Speaker HFS-12
Install the HF speaker so that it is at least 3 ft./1 m away from
the HFM-8 microphone to avoid acoustic feedback. Insert the
HFS-12 plug into the SPEAKER socket and twist 90° clockwise
to lock firmly in place. Under no circumstances should the
HFS-12 prevent the driver from controlling or operating the
vehicle in any way or observing traffic.
7
Advertisement
