Advertisement
Do not install the HFW-1 unit in a metal casing (or similar loca-
tion) that can prevent the unit from transmitting radio frequen-
cies. Aim the internal Bluetooth antenna (see picture) towards
the user (Bluetooth phone).
Mounting Plate MKU-1
MKU-1 is a fixed position mounting plate. It is used to attach
Wireless HF Unit (HFW-1) to the vehicle.
Remote Control Button CUW-2
The Remote Control Button (CUW-2) allows convenient opera-
tion of the phone. The car installation includes a Remote Con-
trol Button CUW-2, which is connected to the HFW-1 with a
cable (REMOTE socket). The speaker volume of the HFW-1
can be controlled with a ring (rotary switch) in the CUW-2. It is
possible to receive a call or to dial by pressing a send/end push
button in the CUW-2 (also voice dialing).
To read more about the use of CUW-2, see CARK112 User's
Guide.
Installation
The positioning of the Remote Control Button CUW-2 is impor-
tant, to achieve the most comfortable position for the user. The
location of the CUW-2 should be selected so that the visibility
of the Remote Control Button is good under all lighting condi-
tions, but not so that the driver's attention is easily distracted.
The CUW-2 should be located so that the driver can easily
reach it. Under no circumstances should the CUW-2 prevent
the driver from controlling or operating the vehicle in any way
or observing traffic.
6
Advertisement
