Table of Contents
Advertisement
CLEANING & MAINTENANCE
NOTE: When cleaning your shaver, make sure the shaver is turned off and
disconnected from the power cord.
CAUTION:
•
To clean the external surfaces of the shaver, use a damp cloth. Do not use strong
detergents or other chemicals.
•
To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer or
heater to dry the shaver.
CLEANING YOUR SHAVER
We recommend following these steps after each use.
1.
Remove the foil assembly by gripping the head assembly release tabs on both
sides of the head and lifting the foil assembly upwards to remove from the hair
pocket.
2.
Tap out excess hair shavings.
3.
Rinse the head of the assembly under warm running water.
4.
Dry the head assembly thoroughly
5.
Replace the head assembly by placing the assembly on top of the hair pocket,
press down and click into place.
NOTE: Lubricate foils and trimmers with lubricating oil every six months
1.
4.
3.
5.
11
Advertisement
Table of Contents
