Remington F9200AU Use & Care Manual page 7

HOW TO USE
1. Remove the head guard.
2. Press the power button to turn on.
3. Pressing the power button again during operation will turn the turbo function on.
turbo function on.
4. Press the power button to turn off.
TURBO FUNCTION
Press the power button once to activate standard shave speed. This speed is intended
for daily shaving or finer beards. Press the power button again to activate the turbo
function, this increases the motor RPM to provide a more powerful shave. The turbo
function is intended for shaving a two or three day beard growth and to provide
additional power to thickness areas of the beard.
TURBO
Light
HEAD LOCK
• The head moves freely by sliding the head lock button downward on the back of
the shaver.
• The head can be locked at any angle by sliding the head lock button upward.
POP UP / INTERCEPT TRIMMER
There are 3 ways to use the pop up / intercept trimmer (blue trimmer in front of the foils)
• The trimmer is set to the following position according to the purpose.
• The position of the trimmer can be changed even when the power is set to ON.
Beard
Set the trimmer to the
middle position
Moustache
Push trimmer down
7
Detail Trimming
Pull out the trimmer
upwards