Adding And Deleting Logical Paths For Rcus (Add Path/Delete Path); Add Rcu Pane Used For Configuration In The Previous Figure; Add Path Pane - HP StorageWorks XP12000 User Manual

Figure 36 Add RCU pane used for configuration in the previous figure

Adding and deleting logical paths for RCUs (Add Path/Delete Path)

Use the Add Path and Delete Path commands to add and delete paths for an RCU. When the Add Path
command is selected, the Add Path pane appears.
Figure 37 Add Path pane
The MCU-RCU Path field includes:
• MCU Port: MCU port number. The Initiator and RCP are listed in the drop-down list and can
be selected.
• RCU Port: RCU port number. The RCU Target port must be specified.
Continuous Access XP user guide
81