NOTE:
After being set, options can be modified and canceled (see
and deleting
5.
Click Apply on the Continuous Access XP main pane to apply settings to the disk array.
Port change operation
Use the RCU Operation tab to change the port mode. Clicking Port in the Switch Display box changes
the tree to the Port tree and changes the list to the Port list. Use the Port tree and Port list to change the
port type.
Figure 39 Changing port types
1.
Click Port in the Switch Display box to change the tree to the Port tree and change the list to the
Port list.
2.
Click a port or a port type from the Port tree. Only the selected port or port type is displayed in
the Port list.
3.
Click the ports in the Port list.
4.
Right-click, and select a port type.
For the port change operation, there is no separate pane. The list keeps displaying the Port list.
84
Continuous Access XP for the Array
settings).
Modifying parameters