Performing Continuous Access Xp Configuration Operations; System Option Pane - HP StorageWorks XP12000 User Manual

100 seconds. The default setting is 70 seconds. The value of the Path Blockade SIM Watch
cannot be smaller than the value of the Path Blockade Watch.
Figure 28 System Option pane
Changing subsystem settings
1.
In the Continuous Access XP main pane, click Other Operation. The Other Operation pane displays
the Tree.
2.
Click a subsystem from the Tree. The Preset List displays subsystem settings.
3. Right-click the list, and select System Option. Current settings appear.
4.
Select Set to close the System Option pane. Changes appear in the Preset List.
5. Verify the changes in the Preset List.
6.
To change settings, right-click the Preset List, select Modify, make the changes, and close the pane.
The Preset List displays updated information.
7. To omit settings, right-click the Preset List, and select Delete. Changes are cancelled.
8. To cancel changes, right-click the Preset List, and select Delete All.
9.
To display error codes, right-click the Preset List, and select Error Detail. Error codes appear on the
right of the Preset List.
10. To apply settings, select Apply (lower right of Continuous Access XP pane). To cancel the operation
and return the list to its original display, select Cancel.
Performing Continuous Access XP configuration operations
Continuous Access XP configuration operations include MCU operations, RCU operations, Continuous
Access XP Asynchronous control operations, and discontinuing Continuous Access XP operations. The
Continuous Access XP main pane
configuration operations:
• MCU operations
• Configuring MCU ports
• RCU operations
• Viewing RCU Status (RCU Status)
• Registering RCUs (Add RCU)
• Modifying RCU options (Change RCU Option)
• Adding and deleting logical paths for RCUs (Add Path/Delete Path)
• Adding and deleting SSIDs for RCUs (Add SSID/Delete SSID)
• Deleting RCUs (Delete RCU)
70
Continuous Access XP for the Array
(Figure 17) provides access to the following Continuous Access XP
configure the MCUs for Continuous Access XP operations
configure RCUs for Continuous Access XP operations