Table of Contents
Advertisement
C
O
M
M
E
R
C
Exercising on the Treadmill
Once the C966 is set up, it is ready to use. There are no complex instructions to
follow or mandatory programming steps required to operate the treadmill. The easy-
to-understand prompts let you select a course and specify how long you want to
work out. Begin working out and then, adapt the speed and incline level to meet
your fitness goals.
CAUTION: Before beginning any fitness program, have your physician give
you a complete physical examination.
USING THE SECURITY CLIP
A security clip is attached by its cord to the red Stop button that straddles the
handrail. Always attach the security clip to your clothing before each work-
out. A tug on the cord trips the security switch and slows the running belt to a
stop. If the security switch trips while you are working out, the treadmill retains
your workout statistics and enters Pause mode. To resume your workout, re-
attach the security clip to your clothing, and press the Speed ▲ key until you
reach the desired speed.
Important: Club owners, managers, personal trainers. Remind users how impor-
tant it is to use the security clip while working out on the treadmill. Instruct them on
how to attach it to their clothing near their waistline. If any complications occur, a
strong tug on the security cord will stop the running belt.
Note: A velcro patch is located on the right side of the console by the handrail.
Use it to store the clip while the treadmill is not being used.
PAUSE, COOL DOWN, SUMMARY AND EXIT FEATURES
Pausing, cooling down, and exiting are integral parts of your workout and can be
accessed any time during a course. The treadmill goes through several prerequi-
sites before actually exiting a course. The following tables explain the different
conditions or situations that apply.
In a course,
you press
Stop
I
A
L
P
R
O
D
This is what happens...,
Enter Pause mode. The running belt slows to a gradual stop.
Note that you may also press the Speed ▼ key until zero
appears on the display. Once the running belt stops, TIME
stops accruing. The display features remain, so you can re-
view your workout statistics. The factory setting for Pause mode
is 2 minutes (120 seconds). The club has the option to change
the setting. A duration can be set between 1 and 120 seconds
and limits how long a user can pause his or her workout. Refer
to Club Information on page 21.
U
C
T
S
D
I
V
I
S
I
O
N
page 33
Advertisement
Table of Contents
