Table of Contents
Advertisement
C
O
M
M
E
R
C
Diagram 16
Adjust the level
of the treadmill.
Bubble level
Running belt
Adjustable rear
foot
14. Level the unit. Diagram 16. Check to make sure that the running deck is level
by taking the following steps:
a. Use a bubble level as shown in Diagram 16 to verify that the running deck
is level. If the treadmill is placed on a slightly, uneven surface, adjusting the
rear feet can help, but will not compensate for extremely uneven surfaces.
Important: If you need to make adjustments, adjust one rear foot at a time.
Do not use the rear foot to raise or lower the unit more than ¾-inches.
Diagram 17
Raise or
lower the
deck.
Hand holds
on rear end
caps
Adjustable
rear foot
b. Adjust the rear feet. Diagram 17. To raise the rear deck, situate yourself
next to the adjustable rear foot. Ask an assistant to lift the rear of the
treadmill slightly while you turn the adjustable rear foot clockwise. Turning
the rear foot counterclockwise lowers the unit.
c. Check the level of the unit after each adjustment. Make adjustments to
the rear feet so that both carry an equal amount of the treadmill's weight
and the load placed upon it.
Important: If the load is not equally compensated, the user will feel exces-
sive vibration or movement at the display console.
CAUTION: The power cord is packaged separately and needs to be prop-
erly attached and inspected regularly. Always make inspecting the power
cord connection part of your routine treadmill maintenance.
page 18
I
A
L
P
R
O
D
U
C
T
S
D
I
V
1
I
S
I
O
N
2
Advertisement
Table of Contents
